# DIY Cat Paw Squishy Toy Tutorial #

Materials List

1. AB silicone (food-grade, 1:1 ratio)
2. Cat paw silicone mold (5cm size)
3. Flesh pink/white pigment paste
4. Constant-temperature water bath (50-70℃)
5. Bubble removal needle/vacuum chamber
6. Food-grade glitter/essence

Step-by-Step Instructions

Precise Mixing
*Measure AB silicone*: Calculate by mold volume (e.g. 50g Part A + 50g Part B for 100g mold)
*Mix*: Stir in figure-8 pattern for 3 mins until smooth

Layered Coloring

Divide mixture into two cups (pad layer + main body)

Pad layer: Add 2 drops flesh pink pigment

Main body: Mix white + pearl powder

Molding Techniques
*Inject your like color silicone into pad grooves*
*Vibrate mold 30s to remove bubbles*
*Double boiler heating (50℃/10mins)*

*Pour white silicone when semi-cured (matte surface)*
*Remove edge bubbles with needle*

Safe Packaging

*Seal in bag after full drying*

*Include maintenance guide card*

—

Pro Tips

English Tips
Mold prep: Apply vaseline
Bubble prevention: Vacuum degas 30s
Adjust hardness: Vary Part B ratio

—

##Safety Warnings
⚠️*Always wear gloves*
⚠️ *Keep uncured silicone away from children*
⚠️*Water temp ≤70℃ to prevent deformation*

—

**Product Features**
Rebound rate ≥300%
EN71-3/CPSIA certified
Service life 2+ years

Click for video tutorial: [https://www.youtube.com/watch?v=2eVBThxDwKo]

Our products can refer to: Silicone Mold-Cat Paw Squishy DIY Set – Customize Resin Kits – DIY Resins

Save this guide for future reference 💾